SAE AIR5687 Inlet / Engine Compatibility - From Model to Full Scale Development
时间:2024-05-21 06:41:18 来源: 标准资料网 作者:标准资料网 阅读:8799
Product Code:SAE AIR5687
Title:Inlet / Engine Compatibility - From Model to Full Scale Development
Issuing Committee:S-16 Turbine Engine Inlet Flow Distortion Committee
Scope:This document reviews the state of the art for data scaling issues associated with air induction system development for turbine-engine-powered aircraft. In particular, the document addresses issues with obtaining high quality aerodynamic data when testing inlets. These data are used in performance and inlet-engine compatibility analyses. Examples of such data are: inlet recovery, inlet turbulence, and steady-state and dynamic total-pressure inlet distortion indices. Achieving full-scale inlet/engine compatibility requires a deep understanding of three areas: 1) geometric scaling fidelity (referred to here as just “scaling”), 2) impact of Reynolds number, and 3) ground and flight-test techniques (including relevant environment simulation, data acquisition, and data reduction practices). The Model-to-Full Scale Subcommittee of the S-16 Turbine Engine Inlet Flow Distortion Committee has examined archives and has obtained recollections of experts regarding air induction system development experience to produce this document.
- 上一篇:SAE AS85049/140 Connector Accessories, Electrical Boots, Heat-Shrinkable, Straight, Category 7
- 下一篇:SAE AS21981 FERRULE, INNER, UNINSULATED, SHIELD TERMINATING , TYPE I, TWO PIECE, CLASS I, FOR SHIELDED CABLES
基本信息
标准名称: | 地下水质检验方法 色度的测定 |
中标分类: |
矿业 >>
地质矿产勘察与开发 >>
水文地质勘察 |
发布日期: | |
实施日期: | 1993-10-01 |
首发日期: | |
作废日期: | |
出版日期: | |
页数: | 2页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 矿业 地质矿产勘察与开发 水文地质勘察
基本信息
标准名称: | 钢框竹胶合板模板 |
英文名称: | Plybamboo form with steel frame |
中标分类: |
工程建设 >>
施工机械设备 >>
作业设备与仪器仪表 |
ICS分类: |
建筑材料和建筑物 >>
施工设备
|
发布部门: | 中华人民共和国建设部 |
发布日期: | 1999-05-26 |
实施日期: | 1992-12-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
提出单位: | 建设部标准定额研究所 |
归口单位: | 建设部建筑工程标准技术归口单位中国建筑科学研究院 |
起草单位: | 中国建筑科学研究院 |
起草人: | 施炳华、吴广彬、高淑娴、陈家珑、李继文等 |
出版社: | 中国标准出版社 |
出版日期: | 2004-04-22 |
页数: | 25页 |
书号: | 155066.2-12777 |
适用范围
钢框竹胶合板模板是充分利用我国竹材资源,进一步提高竹胶合板模板使用寿命,实现模板产品标准化而研制的一种新型建筑模板,为加强钢框竹胶合板模板的生产和质量管理,促进其推广应用特制定本标准。 本标准规定了钢框竹胶合板模板的定义、分类、规格、要求、试验方法、检验规则和标志、包装、运输、贮存。
本标准适用于浇筑混凝土用的钢框竹胶合板模板。
前言
没有内容
目录
没有内容
引用标准
下列标准所包含的条文,通过在本标准中引用而构成为本标准的条文。本标准出版时,所示版本均为有效。所有标准都会被修订,使用本标准的各方应探讨使用下列标准最新版本的可能性。
GB/T 699-1988 优质碳素结构钢技术条件
GB/T 700-1988 碳素结构钢
GB/T 2828-1987 逐批检查计数抽样程序及抽样表(适用于连续批的检查)
GB/T 3098.1-1982 紧固件机械性能螺栓螺钉和螺柱
GB/T 5117-1995 碳钢焊条
JGJ 81-1991 建筑钢结构焊接规程
JG/T 3026-1995 竹胶合板模板
所属分类: 工程建设 施工机械设备 作业设备与仪器仪表 建筑材料和建筑物 施工设备